What is lens flare?
A camera lens consists of multiple lens elements that project incoming light onto the camera sensor. These lens elements have different shapes and can be either concave or convex. In a zoom lens, the relative position of different lens elements changes while zooming. A prime lens, on the other hand, has a fixed focal length.
When bright light, such as sunlight, enters the lens, some of the light can be reflected internally between the different lens surfaces. These reflections may appear in the photograph as coloured circles or light spots and can also reduce contrast. This phenomenon is known as lens flare.
Lens flare often appears as round or oval light spots in different colours. In some cases, even the shape of the aperture can be recognised.
Lens flare is clearly visible in the example photograph. The sun is part of the image and causes strong lens flare that varies in shape and colour. The photograph was taken with a Nikon 16-85mm lens at 1/50 second, f/11 and a focal length of 16 mm.
How to prevent lens flare
One of the easiest ways to prevent lens flare, or at least reduce it, is to use a good lens hood.
Angle between the light source and camera
The angle between the light source and the optical axis of the camera lens also determines whether lens flare occurs. Pay attention to where the brightest light is coming from and try to prevent it from shining directly into the lens.
When the angle between the light source and the lens is small, more direct light can enter the lens. This increases the chance of lens flare when, for example, the sun is visible in the frame. The angle of incidence is then relatively small.
When the light source is outside the frame and the angle becomes larger, the risk of lens flare decreases. It can sometimes take a little experimentation to find the best shooting angle. Lens flare can therefore often be avoided, at least when that is what you want. Sometimes, however, you may deliberately want lens flare because it can add a creative effect to a photograph.
How to remove lens flare
Paying attention to the direction of the light is one way to prevent lens flare. There is also a technique for removing lens flare afterwards when it cannot be avoided while taking the photograph.
For this method, it is useful to photograph from a tripod. You also need to be able to work with layers in Photoshop or another photo-editing program.
Removing lens flare with layers
The principle is quite simple:
- Take two photographs immediately after each other. Block the light source in the second photograph.
- Place both photographs in Photoshop as separate layers, with the photograph without lens flare as the top layer.
- Using a soft brush, eraser or layer mask, remove only the area where the light source was blocked.
- Combine the two photographs into a single image. The flare-free part of the second photograph now covers the lens flare in the other photograph.
The principle of the darkroom
But how do you make two almost identical photographs, one with lens flare and the other without it? That is exactly what this technique is about.
Anyone who has worked in a traditional darkroom will recognise the principle of burning and dodging. While exposing photographic paper, a hand or a piece of card could temporarily block the light to prevent part of the photograph from becoming overexposed.
Applying the same principle to digital photography
The same principle can be applied to digital photography. Look carefully through the viewfinder and block the light source causing the lens flare as effectively as possible, for example with your hand or fingers. Make sure that the camera does not move.
By combining the two photographs afterwards, you can place the flare-free part over the photograph containing the lens flare. If you used your finger to block the light source, for example, you can carefully remove it using a mask or eraser.
Other ways to remove lens flare
With some practice, lens flare can also be removed from a photograph using selection tools in Photoshop. Select the light spot and adjust its colour to match the surrounding area. A similar result can be achieved by cloning or retouching the lens flare.
With practice, unwanted light spots can be made almost invisible. Nevertheless, preventing lens flare is usually easier than removing it afterwards.
Using lens flare creatively
Sometimes, as a photographer, you may deliberately want lens flare in your photograph. Lens flare can be used intentionally to create a creative or atmospheric result. In the example photograph, the effect was used deliberately.
Lens flare does not therefore have to be a mistake in a photograph. In this example, the effect was deliberately used to give the station hall in which the photograph was taken more atmosphere than the architecture of the space alone would provide.
The lens flare creates a distinctive effect and pushes the station hall slightly into the background. A technical characteristic of the lens is therefore deliberately used to create a more creative image.
Below are some more examples of photographs in which lens flare is visible.
The sun in the photograph above is reflected in the water. The lens flare appears within the sun's rays. The effect is not very prominent, but it is visible.
The strong sunlight causes clearly visible green lens flare in this photograph. The green colour is caused by internal reflections in the lens and is influenced, among other things, by the coatings on the lens elements.